Section / 02 / 01

Trench Convector

Floor-recessed emitter, set flush with the finished floor along glazing.

Family: 01
Profile: Recessed, flush
Convection: Natural / forced / four-pipe
Custom: Yes

Recessed trench convector with aluminium grille and steel casing — **Plate 01**Trench convector — recessed casing, aluminium grille

Construction

A copper-tube heat exchanger with aluminium fins sits in a recessed steel casing. The grille is carried flush with the floor finish, so the emitter disappears into the architecture. It is built in three configurations: natural convection where the run length is available, forced convection where output per metre has to rise, and a four-pipe version that heats and cools from the same casing.

Casing and grille cut to the run length.
Angled and radiused sections for continuous runs around a corner.

Configuration
Profile	Recessed, flush
Casing	SPCC cold-rolled steel, 1.2 mm
Convection	Natural / forced / four-pipe
Length	Standard and cut lengths
Connection	End or side; DN15 / DN20

Dimensions and heat output are issued per order against the drawing.

Technical data

Trench convector — natural convection7 pp · 6.5 MBPDF →Trench convector — forced convection4 pp · 1.7 MBPDF →Trench convector — heating and cooling3 pp · 0.8 MBPDF →

Selection

Give the required output, the flow and return temperatures, and the length the room allows. The model, the length and the connection are selected from the data sheet.

Configurations