Section / 02 / 04
Wall-Mounted Convector
Wall casing, natural or forced convection, for commercial interiors.
Construction
A shallow casing fixed to the wall, discharging across the floor or up the wall face. A fan-assisted version is made to order where the wall length is short.
- Shallow casing for where floor space is limited.
- Fan and control options for high output in short lengths.
- Casing profile matched to the perimeter range where both appear.
| Profile | Wall-mounted |
|---|---|
| Casing | SPCC cold-rolled steel, 1.2 mm |
| Convection | Natural / forced |
| Length | Standard and cut lengths |
Dimensions and heat output are issued per order against the drawing.
Technical data
Wall-mounted convector — technical data and installationPDF →The model table and heat output in this sheet are for the natural-convection version. Figures for a fan-assisted unit are issued with the quotation for that unit.
Selection
Give the required output, the flow and return temperatures, and the length the room allows. The model, the length and the connection are selected from the data sheet.
Configurations
Variants
Natural convection
Discharge across the floor or up the wall face.
- Convection
- Natural
- Media
- Heating water
- Data sheet
- PDF · 2 pp · 0.7 MB →
In place
Other families
Trench Convector
Floor-recessed emitter, set flush with the finished floor along glazing.
Perimeter Convector
Surround-line casing under full-height glazing, front-outlet or under-window.
Freestanding Convector
Floor-standing casing, natural convection, for rooms without a recess.
Steel Panel Radiator
Flat steel panel with an integrated top cover and side panels.
A drawing, a schedule or a photograph of the unit being replaced is enough to quote against.
Enquire about this family